Control Panel; Temperature Regulation; Switching Off; Fastfreeze Function - Electrolux IG0946S Benutzerinformation

4. CONTROL PANEL

Display
1
Temperature warmer button
2
Temperature colder button
3
OK
4
It is possible to change predefined sound
of buttons by pressing together Mode
4.1 Display
A
4.2 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer to
"Troubleshooting" .

4.3 Switching off

1. Press the appliance ON/OFF for 3
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.
6
B C
F E D
1
5 4 3
Mode
5
ON/OFF
6
and temperature colder button for a few
seconds. Change is reversible.
A. Timer indicator
B. FastFreeze function
C. Temperature indicator
D. Alarm indicator
E. ChildLock function
F. DrinksChill function

4.4 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulators.
Default recommended set temperature
is:
• -18°C for the freezer
The temperature range may vary
between -15°C and -24°C for freezer.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.

4.5 FastFreeze function

The FastFreeze is used to perform pre-
freezing and fast freezing in sequence of
Freezer compartment. This function
accelerates the freezing of fresh food
and, at the same time, protects
ENGLISH
2
9