Operation; Control Panel; Switching Off; Fastfreeze Function - Electrolux CI1001 Benutzerinformation

4. OPERATION

4.1 Control panel

Power indicator light
1
Temperature regulator
2
FastFreeze light
3
4.2 Switching on
• Insert the plug into the wall socket
• Turn the Temperature regulator
clockwise to a medium setting.
If the temperature inside the appliance is
too high the Alarm light will blink. Active
the FastFreeze function.

4.3 Switching off

1. Turn the Temperature regulator to
the "O" position.
The power indicator light will switch
off.
2. Remove the plug from the wall
socket

4.4 Temperature regulation

The temperature is regulated
automatically.
1. Turn the Temperature regulator
toward lower settings to obtain the
minimum coldness.
2. Turn the Temperature regulator
toward higher settings to obtain the
maximum coldness.
1 2 3 4 5
FastFreeze switch and alarm reset
4
switch
Alarm light
5
A medium setting is
generally the most suitable.
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance
depends on:
• room temperature,
• how often the door is
opened,
• the quantity of food
stored,
• the location of the
appliance.

4.5 FastFreeze function

You can activate the FastFreeze function
by pressing the FastFreeze switch.
TheFastFreeze light will light up.
This function stops
automatically after 52 hours.
It is possible to deactivate
the function at any time by
pressing FastFreeze switch.
The FastFreeze light will
switch off.

4.6 High temperature alarm

Temperature increase in the freezer
compartment (for example due to an
earlier power failure or door is open) is
indicated by:
ENGLISH 7