Philips HR7510/10 Benutzerhandbuch Seite 4

• If the blades get stuck,
unplug the appliance
before you remove the
ingredients that block the
blades.
• Let hot ingredients cool
down (<60°C) before
processing them.
• Be careful if hot liquid
is poured into the food
processor or blender as it
can be ejected out of the
appliance due to a sudden
steaming.
• This appliance is intended
for household use only.
Caution
• In order to avoid a hazard
due to inadvertent
resetting of the thermal
cut-out, this appliance
must not be supplied
through an external
switching device, such as
a timer, or connected to
a circuit that is regularly
switched on and off by the
utility.
• Never switch off the
appliance by turning the
blender jar, the bowl or its
lid. Always switch off the
appliance by turning the
speed selector to 0.
• Unplug the appliance
immediately after use.
• Always wait until the
moving parts stop running,
EN
8
then switch off and unplug
the appliance before
opening the lid and
reaching into any of the
parts that move in use.
• Always switch off and
unplug the appliance
if it is left unattended,
and before assembling,
disassembling, cleaning
and changing accessories,
or approaching parts that
move in use.
• Thoroughly clean the
parts that come into
contact with food before
you use the appliance
for the first time. Refer to
the instructions and table
for cleaning given in this
manual.
• Never use any accessories
or parts from other
manufacturers that Philips
does not specifically
recommend. If you use
such accessories or parts,
your guarantee becomes
invalid.
• Do not exceed the
maximum level indication
on the bowl or the jar.
Follow the quantities,
processing time and speed
as indicated in the user
manual.
• Always let the appliance
cool down to room