Herunterladen Diese Seite drucken

Buttner Elektronik MT 150-PP Bedienungsanleitung Seite 20

Solarregler

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Please read the operating manual of
i
the solar controller thoroughly prior
to use, connection and start-up.
For campers and caravans.
The solar controller is a special development
for use in campers and caravans, and it is suit-
able for all types and makes of lead batteries
(also for acid, GEL/dryfit, AGM/fleece batteries,
as well as LiFePO4 batteries). Optimum
charging is ensured by an intelligent micro-
processor control with characteristic lines IU-
1oU2. Working fully automatically and main-
tenance-free, the solar controller offers the
following functions:
Battery Ports and Charging Programs:
Charging port board battery I, depending on
the type of battery (lead or LiFePO4), 3 or 5
charging programs selectable (see table 1):
Lead Battery:
a) "Liquid Acid/AGM1": Closed and open
acid/lead-acid batteries, as well as AGM
with indication 14.4 V
b) "AGM 2": Closed, gas-tight AGM/fleece
batteries (absorbed glass Mat, lead-fleece
technology) with the indication 14.7 V.
c) "Gel": Closed, gas-tight Gel/dryfit batteries
(determined electrolyte)
LiFePO4 Battery:
a) "14.2 V": Lithium iron phosphate batteries
with a charging voltage of 14.2 V.
b) "14.4 V": Lithium iron phosphate batteries
with a charging voltage of 14.4 V.
c) "14.6 V": Lithium iron phosphate batteries
with a charging voltage of 14.6 V.
d) "14.7 V": Lithium iron phosphate batteries
with a charging voltage of 14.7 V.
20
Charging Port Starter Battery II:
Separate auxiliary charging port with reduced
charging current (12 V/0.8 A or 1.5 A) for sup-
port charging and trickle charging of the vehi-
cle's starter battery with overcharge protection
in case of extended stop periods.
Further Characteristics of the Unit:
• The charging voltage being free from
peaks is controlled in such a way, that any
overcharging of the batteries is excluded.
• Two Battery Charging Ports: Automatic
charging of the main battery or board bat-
tery (Board I): Support charging and trickle
charging of the vehicle's starter battery
(Start II) with overcharge protection.
• Unattended Charging: Standard protection
against back discharge of battery (in case of
insufficient solar power (such as at twilight, at
night etc.) and against overload/overheating.
• Floating Operation: Observation of the
characteristic lines of charging, even with
simultaneous operation of consumers be-
ing connected to the battery.
• Overcharge protection: Reduction of the
charging current of the battery in case of
excessive solar power and full battery. Im-
mediate recharging in case of power con-
sumption to ensure always the best possi-
ble charging state of the battery.
• Characteristic Line of Charging "IU
defined charging boost (U1) avoids harmful
acid accumulation and provides compen-
sation charge to the individual battery cells.
After that, automatic trickle charging (U2).
• On-board Mains Suppression Filter: Inte-
grated on-board mains suppression filter
ensures unproblematic parallel operation of
the controller with other charging sources,
wind-and petrol-driven generators, mains
supply chargers, dynamos etc. at one battery.
1
2
oU
": A

Werbung

loading

Diese Anleitung auch für:

Mt 230-ppMt 350-ppMt 550-pp