20
3.3.2
The transducer can be operated with other customer related display units or
voltage supplies.
The electrical connection is to be made by means of suitable cables considering
EMI demands and according to the pin description shown below:
Pin Description:
2
3
vsc43ma4-de-161219
Downloaded from
www.Manualslib.com
Operation With Other Supply And Evaluation Units
Socket
Pin 1:
Pin 2:
1
Pin 3:
5
Pin 4:
4
Pin 5:
Incorrect connection or inadmissible supply voltage can damage
the transducer.
Maximum admissible load resistor in Ω:
( Supply Voltage(V) – 9V ) / 0,02A
manuals search engine
Type M12 A, 5 pin, male
do not connect
Output 4 – 20 mA
Power Supply: +9 to +30 VDC
do not connect
Shield