Child Lock; Heating And Cooking; Microwave Operation; Microwave Operation, Quick Start - Silvercrest SMW 800 C3 Bedienungsanleitung

Child lock

Activate this setting to prevent accidental operation
by children or other persons not familiar with the
operation of the appliance.
The child lock icon
and the appliance cannot be put into operation
as long as this function is activated.
■ Press and hold the Stop button
hear a beep and the child lock icon
on the display . The buttons and the control
dial are now deactivated.
■ To deactivate the child lock, press and hold the
Stop button until you hear an extended
beep and the child lock icon

Heating and cooking

NOTE
You can cancel all input processes by pressing
the Stop button.
The appliance reverts to standby mode.

Microwave operation

WARNING! RISK OF FIRE!
Never use the grill stand
objects when you are using the appliance in the
microwave mode. Metals reflect the microwave
radiation and this leads to the generation of
sparks. This can cause a fire and irreparably
damage the appliance!
NOTE
During the cooking process, drops of water can
form on the oven door or on the housing. This is
normal and is not an indication of a malfunction.
When the appliance has cooled down, wipe the
moisture off with a dry cloth.
│ GB │ IE │ NI
■ 12
appears in the display
until you
appears
disappears.
or other metallic
1) Press the microwave button
(800 watts) appears on the display
the icon.
2) Turn the control dial
output level (P800–P100).
3) Confirm your selection by pressing the Start/
Quick Start button
4) Now select the desired operating time by
turning the control dial
5) Confirm the set operating time by pressing
the Start/Quick Start button
The microwave process starts.
NOTE
Pausing the cooking process
Press the Stop button
cooking process. The appliance pauses the
cooking process and stops countdown of the
remaining time. Press the Start/Quick start
button to resume the cooking process.
Cancel the cooking process
Press the Stop button
cooking process. The appliance reverts to
standby mode.
Check the output level
During the cooking process, press the Microwave
button . The set output level is shown
briefly on the display
6) When a cooking process is complete, "End"
appears on the display
4 beeps.
If the door of the microwave is not opened, the
appliance beeps again after about 2 minutes.

Microwave operation, quick start

With this function you can start cooking immedi-
ately for 30 seconds (or longer, up to 12 minutes)
at 800 W.
■ Press the button Start/Quick start button
once. The icon appears in the display
well as "30". After a brief moment, the cooking
process starts for 30 seconds. The countdown
begins.
. "P800
and
to set the desired
.
.
.
once to pause a
twice to stop the
(P100 - P800)
and you will hear
SMW 800 C3
as