4) THE CORRECT POSITIONING OF OCCUPANT BELT RESTRAINTS ON
THE USER
ATTENTION! the pelvic-belt restraint should be worn low across the front of the pelvis, so that
the angle of the pelvic-belt restraint is within the preferred zone from 30° to 75° to the horizontal,
similar to that shown in Figure 5. A steeper (greater) angle within the preferred zone is desirable,
ATTENTION! Our postural belts 817, 868, 828, 853, 894, 903 and 906 are are not intended to be
as an occupant restraint in a moving, but they can be used in addition
YES
beneath
the armrest
and the frame
NO
above
the armrest
and the frame
THE INCORRECT PLACEMENT OF BELT RESTRAINTS
FRONT VIEW
13 / 60
SIDE VIEW