testo 922 Bedienungsanleitung Seite 31

If further wireless probes are within reception range,
the probe ID of a different wireless probe may be
displayed.
If necessary: switch off other wireless probes or
remove from the reception range, and start
automatic probe detection again with
Press
2
3
To s s et A A uto O O ff:
Configuration mode is opened, Auto Off is lit.
Select the desired option with
:
· On: The measuring instrument switches off
automatically if no button is pressed for 10 min.
Exception: A recorded reading is shown on the
display (Hold is lit) or readings are being printed
cyclically (
· OFF: The measuring instrument does not switch
itself off automatically.
4
To s s et t t he m m ax./min.print f f unction:
Configuration mode is opened, MaxMin and
Select the desired option with
.
· On: Maximum and minimum values are printed out
as well when current or recorded readings are
printed.
· OFF: Maximum and minimum values are not printed
out as well when current or recorded readings are
printed.
5
To s s et c c yclical p p rinting:
Configuration mode is opened, Time and
Use /
which the readings are to be sent to the printer and
confirm with
to change to the next function.
lit).
to set the time interval (in minutes) at
.
5. Operation
.
and confirm with
are lit.
and confirm with
are lit.
31