Building In Dimensions - ETNA T108V Anleitung

Building in dimensions

Saw the opening in the worktop. This should
be done very accurately (see ill.). Also saw out
any partitions that may be present. Ensure that
there is sufficient space allowed at the sides
and at the back. Ensure that there is a clear
space with a height of at least 15 mm below the
hob.
500
585
480
T107H/V - T112VW - T108V - A108VR
Please note:
The distance between the hob and the rear
wall must be at least 40 mm.
clearance required
33
33
560
min.40
480
min.40
T117VW
685
510
560