Bosch KAD Serie Montage- Und Gebrauchsanleitung Seite 52

en
Observing drinking water quality
All materials used in the drinks dispenser are odourless
and tasteless.
If the water has an aftertaste, this may be caused by:
Mineral and chlorine content of the drinking water.
■
Material of the domestic water line and connection
■
line.
Freshness of the drinking water. If water has not
■
been dispensed for a long time, the water may have
a "stale" taste. In this case fill approx. 15 glasses
of water and throw away.
We recommend that you regularly dispense a little
fresh water from the water maker and that you do not
switch off the appliance. This will ensure that the best
water quality is retained.
The enclosed water filter will filter only particles out
of the supply water, not bacteria or microbes.
Dispensing ice/water
Select the ice and water dispenser button (water,
■
crushed ice or ice cubes).
Keep pressing the button until the required quantity
■
is in the glass.
Dispensing water
Note
The water from the water dispenser is cooled
to a palatable temperature. If you would like the water
colder, place ice cubes in the glass before dispensing
the water.
Note
When dispensing fairly large amounts of water, the
dispensed water may become warmer.
52
Dispensing ice
Disconnecting the ice maker
If ice cubes are not to be dispensed for longer than
1 week (e.g. holiday), temporarily disconnect the ice
cube maker to prevent the ice cubes from freezing
together.
To disconnect the ice maker:
1. Remove the ice cube container.
2. Keep pressing the "options" button, until
the [IWD off] function is marked with an arrow.
3. Activate by pressing the setting button + (function is
framed).
4. Empty and clean ice cube container. Re-attach
the ice cube container. Ensure that the ice cube
container engages with the support.
Switching on the ice cube maker again:
1. Keep pressing the "options" button, until
the [IWD off] function is marked with an arrow.
2. Deactivate by pressing the setting button - (function
is no longer framed).