Before Use; Filling With Water - Taurus AGATHA 2800 Handbuch

English
Steam iron
AGATHA 2800 / HYDRA 2600
DESCRIPTION
A Spray button
B Steam blast button
C Steam flow control
D Auto-cleaning button
E Temperature regulator
F Pilot light
G Filling spout
H Spray nozzle
I Soleplate
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
- Do not use the appliance if the on/off switch
does not work.
- Use the appliance handle/s, to lift or move it.
- Do not use the appliance at an angle or turn it
over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- To keep the non-stick coating in good condition,
do not use metal or pointed utensils on it.
- Respect the MAX level indicator. (Fig.1)
- Unplug the appliance from the mains when not
in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional or industrial use.
- Store this appliance out of reach of children
and/or those with reduced physical, sensorial
or mental abilities or who are unfamiliar with its
use
- Do not store or transport the appliance if it is
still hot.
- If the iron is left in its housing at maximum tem-
perature for prolonged periods, this may cause
discolouration, which will not affect appliance
operation in any way.
- To ensure that the iron functions correctly, keep
the soleplate scratch free and do not use it on
metal objects (e.g. the ironing board, buttons,
zips...)
- The use of distilled water is recommended,
especially if the water in your area contains
any type of silt or is "hard" (contains calcium or
magnesium).
- Check that the lid is closed properly before
switching the appliance on.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Never rest the appliance on a surface while in
use.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance on pets or animals.
- Do not use the appliance to dry garments of any
kind.
- Turning the thermostat control to the minimum
(MIN) setting does not guarantee that the iron is
switched off completely.
INSTRUCTIONS FOR USE

BEFORE USE:

- Peel off appliance's protective film.
- Make sure that all the product's packaging has
been removed.
- Some parts of the appliance have been lightly
greased, consequently, the appliance may give
off a light smoke the first time it is used. After a
short time, this smoke will disappear.
- Prepare the appliance according to the function
you wish to use:

FILLING WITH WATER:

- It is essential to have filled the tank with water to
be able to work with steam.
- Open the lid on the filling spout.
- Fill the tank, taking care to respect the MAX
level (Fig. 1).
- Close the filling spout lid.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the thermostat control to the desired tem-
perature position.
- Do not use temperatures higher than those
indicated on the garments to be ironed.
● Temperature for synthetic fibres (Polyester,
Nylon...).
●● Temperature for silk, wool. (Minimum