Controllable Functions; Service And Maintenance; Changing Light Bulbs - LGB Ge 4/4 III Glacier on Tour Bedienungsanleitung

Controllable Functions

Lighting *
Sound effect: whistle blast
Sound effect: Squealing brakes off
Raising/lowering pantographs, sequence **
Sound: Greeting announcement
Sound: station announcements, sequence for Chur - St. Moritz
Sound effect: Operating sounds *
Raising/lowering pantographs, direction-dependent *
Sound on/off
ABV, off
Sound effect: Short whistle blast
Sound effect: Heating voltage relay
Sound effect: Blower
Sound: vacuum pump
Sound effect: sanding
* active in analog operation
** is turned off by Function 7
Note:
At www.LGB.de, you will find at „Tools and Downloads" an extensive description of
the decoder as well as a tool that you can use to calculate different settings.
Downloaded from www.Manualslib.com
1
2
3
4
5
6
7
8
9
10
12
13
14
15
manuals search engine
SERVICE
Lubrication
LV + LR
The axle bearings should be lubricated occasionally with a small amount of Märklin-
Öl (7149).
Sound 1

Changing Light Bulbs

BS
Headlights: Carefully lift the glass from the lantern. Pull the light bulb out of the
Sound 15
socket with a pair of tweezers. Insert new light bulb. Put the model back together.
Sound 7+9
Interior Lighting: Pull the light bulb out of the socket with a pair of tweezers. Insert
Sound 10
new light bulb.
FS
Changing Traction Tires
Sound 16
• Remove the old traction tire with a small flat blade screwdriver:
• ift the old traction tire out of the groove in the driving wheel.
Sound 8
• Carefully push the new traction tire over the wheel and insert it into the groove of
the wheel.
Sound 2
• Check to make sure that the traction tire is properly seated.
Sound 6
Sound 4
Sound 3
Sound 5
13