Symbols Used; General Safety Notes; Storage Of These Operating Instructions; Safety Notes - Stahl 8453 Betriebsanleitung

2

Symbols Used

3

General Safety Notes

3.1

Storage of these Operating Instructions

Read these operating instructions carefully and store them near the installation place.
For correct operation, observe all enclosed documents and the operating instructions
of the equipment to be connected.
3.2

Safety notes

Observe the following information during installation and operation:
- Any damage may compromise the explosion protection
- National and local safety regulations
- National and local accident prevention regulations
- National and local assembly and installation regulations
- Generally recognized technical regulations
- Safety notes in these operating instructions
- Characteristic values and rated operating conditions on the rating plates and
- Additional information plates on the device
220082 / 8453602300
2015-11-30·BA00·III·en·02
Downloaded from www.Manualslib.com
Information sign: describes notes and recommendations.
Warning symbol: danger due to energised parts!
Warning symbol: danger due to explosive atmosphere!
Warning symbol: danger due to hot surfaces!
Warning symbol: general hazard
Use the devices only for their intended purpose!
We cannot be held liable for damage caused by incorrect or unauthorized

use or by non-compliance with these operating instructions.
Use the device only if it is undamaged.

Any unauthorized work on the device is prohibited!
Installation, maintenance, overhaul and repair may only be carried out by
appropriately authorised and trained personnel.
data plates
manuals search engine
WARNING
WARNING
Control Unit
8453
Symbols Used
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
3