Mounting Of Quick Coupling; Connection Of High Pressure Hose - Nilfisk-ALTO POSEIDON 2 Betriebsanleitung

Poseidon 2
EN 3.4 Mounting of quick
coupling
3.5 Mounting of high
pressure hose
4 Operating your pressure washer
4.1 Connection of high pres-
sure hose
66
1. Screw the quick coupling
tight on to the water inlet (2).
Note: The inlet fi lter must al-
ways be fi tted in the water inlet
pipe to fi lter out sand, lime stone
and other impurities as these
will damage the pump valves.

Caution: Failure
to fi t the fi lter will
invalidate the
guarantee.
Attach the high pressure hose
(4) to the spray handle (7).
Machines without hose reel: At-
tach the high pressure hose (4)
to the high pressure connection
of the machine (3).
Only max. 7 m additional exten-
sion hose can be added.
Machines with hose reel: Un-
wind the high pressure hose
completely.
Original Instructions