Index 0X0047: Resolution; Index 0X0048: Free Resolution; Index 0X004A: Dynamic Position Range - TR-Electronic LE-25 Benutzerhandbuch

7.3.2

Index 0x0047: Resolution

The parameter Resolution defines the measuring system resolution.
Index
0x0047
Value Assignment
0x00 10 mm
0x01 1 mm
0x02 1/10 mm
0x03 1/100 mm
0x04 1/10 Inch
0x05 1 Inch
0x06 1/8 mm
0x07 Free Resolution
7.3.3

Index 0x0048: Free Resolution

The parameter Free Resolution defines the measuring system resolution, if under parameter
Resolution the option Free resolution was selected. Input in 1/100 mm.
Index
0x0048
Lower limit
Upper limit
Default
7.3.4

Index 0x004A: Dynamic Position Range

Dynamic Position Range is a parameter, who characterizes mathematic calculation of the
measure-value. With high measuring-dynamic there is no mathematic calculation on the measure-
value, but the noise of the measure-value is larger, in case of small measuring-dynamic the noise is
lower, but there exist a small time-delay for the measure-value.
Index
0x004A
Value Assignment
0x00 High
0x01 Medium
0x02 Low
0x03 No Moving Average
Printed in the Federal Republic of Germany
06/15/2020
Subindex Name
0 Resolution
Description
1 Digit = 1 centimeter
1 Digit = 1 millimeter
1 Digit = 1/10 millimeter
1 Digit = 1/100 millimeter
1 Digit = 1/10 inch
1 Digit = 1 Inch
1 Digit = 1/8 millimeter
1 Digit = 1/100 millimeter
Subindex Name
0 Free Resolution
1
65535
100 (1 mm)
Subindex Name
Dynamic Position
0
Range
Description
High measuring dynamic
Average measuring dynamic
Low measuring dynamic
Output of the raw value
TR - ELE - BA - DGB - 0030 - 01
Length Type
8 Bit UIntegerT
Length Type
16 Bit UIntegerT
Length Type
8 Bit UIntegerT
 TR-Electronic GmbH 2020, All Rights Reserved
Access
rw
Default
X
Access
rw
Access
rw
Default
X
Page 67 of 88