Herunterladen Inhalt Inhalt Diese Seite drucken

Siemens Echomax XPS Serie Betriebsanleitung Seite 12

Ultraschall-füllstandsensoren
Vorschau ausblenden Andere Handbücher für Echomax XPS Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 31
Mounting
Note:
PTFE tape or other appropriate sealant may be used to aid in sealing the threads for use in
pressure applications.
Mounting – Solids Applications
Page EN-10
Downloaded from
www.Manualslib.com
WARNING: Special handling precautions must be taken to protect the
face of the transducer from any damage.
Mount the transducer so that it is above the maximum material level by at least the
blanking value. Refer to the associated controller manual.
On liquid applications, mount the transducer face parallel to the liquid surface. On
solids applications, use a Siemens Milltronics Easy Aimer to help aim the
transducer.
Do not overtighten. Most applications require only hand tightening of the mounting
hardware. Connect a safety chain from the transducer to a structural member to
secure installation. Consider using the optional temperature sensor when a flanged
transducer is used, when a fast temperature response is required, or in high
temperature vessels.
For pressure tight applications, install transducers hand tight plus ½ turn to 1½ turns.
Improper installation may result in loss of process pressure.
WARNING:
XPS/XCT Series Transducers – OPERATION MANUAL
manuals search engine
Easy Aimer (typical model)
safety chain
transducer
A5E32282889

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis