Siemens Pointer CLS200 Schnellstartanleitung Seite 17

Local display and operation
1.
Locking functions can be combined:
2.
3.
Sensor Test
Open the Device Menu to find and activate Sensor Test via PDM, and to see the results:
(test successful, or test failed).
Error Messages and References: PROFIBUS PA
Note:
(order number 2.092), available for download from www.profibus.com.
Page EN-16
Downloaded from www.Manualslib.com
Go to Local Display and Operation > Local Operation:
Lock
options
HW Write Parameter changes using SIMATIC PDM and
Protection settings via local operation are both disabled.
Independent of the other lock functions.
Write locking Prevents parameter changes via the bus. Local
operation is possible.
Local When disabled, no access is possible via the
Operation keypad. After a communication failure, local
operation is automatically enabled 30 s later. Once
communication is reestablished, the original
setting for Local Operation is restored.
HW Write Protection
Off
On
Off
Off
Off
Go to Local Display and Operation > Display source:
select either Output Value, Primary Value, Sensor Value, or Electronics Temperature.
Go to Local Display and Operation > Local Status Text:
select a language, or numeric option.
For more detail, please consult the PROFIBUS PA User and Installation Guideline
Pointek CLS200/300 (Digital) – QUICK START MANUAL
manuals search engine
Effect
Write locking Local Operation
Off
On or Off enabled or disabled
Off
On
On
Digital
Turn on/off
display
Keypad L
Mode 10
SIMATIC PDM Lc
(via Device Menu)
SIMATIC PDM LA
Digital display
enabled
L
disabled LA
disabled LL
enabled Lc
7ML19985XA82