Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance - cecotec ForceTitanium 520 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
Steam ironing:
Fill the iron as described in 'How to fill with water'.
1. Plug the appliance into the mains supply.
2. Place the iron vertically and turn the temperature control dial
to the steam position.
3. Steam ironing is only possible when the temperature control
dial is set at higher temperature settings, signalled with the mark
'MAX'; otherwise, the water will leak from the soleplate.
4. Preheat the iron until the indicator light turns off.
5. Turn the steam selector to the required setting, according to
the different types of fabric.
6. The iron is ready for use.
How to use the water spray :
Before using the spray function, check the fabric label for ironing instructions,
as some fabrics may be spotted or stained with moisture. The spray function
is particularly helpful to remove stubborn wrinkles and whenever extra
moisture is needed. The spray may be used both with steam or dry ironing.
Simply press the spray mist button when desired.
How to use the steam burst :
The steam burst feature provides additional steam to remove stubborn wrinkles. It may be
used both with steam or dry ironing. Press the power steam button to release a steam burst.
Pressing the button several times may be necessary to build up the steam burst. Wait a few
seconds for the steam to penetrate the fabric before pressing the button again for more steam.
Note: for optimal results, do not apply more than three successive bursts after the indicator
light turns off.
After use:
1. Turn off and unplug the iron.
2. Empty the iron immediately after use. Do not store the iron with water in its tank.
3. Wait until the iron has cooled down before storing it. Let it rest on its base in vertical position
to protect the soleplate from scratches, corrosion, or stains.

5. CLEANING AND MAINTENANCE

Outside surface of the iron:
After unplugging and letting the iron cool down, wipe its exterior surface with a damp cloth
and, if necessary, a mild detergent.
WARNING: do not use any abrasive cleaning agent.
ENGLISH
FORCETITANIUM 520
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis