Cleaning And Disinfection - Ottobock Motus CV Gebrauchsanweisung

Maintenance, cleaning, and disinfection
Check
Air pressure
Wear on folding mechanism
Spoke tension of the rear wheels
Screw connections
To ensure smooth operation at all times, the following precautions and cleanings should be car-
ried out. Users may carry these out by themselves.
• Hair and dirt particles generally accumulate between the caster wheel and fork. This can
restrict the caster wheels from rotating smoothly. Remove the caster and thoroughly clean the
fork and caster using a mild detergent.
• The rear wheels feature a quick-release system. To keep this system operational, ensure that
no dirt adheres to the quick-release axle or axle housing. The quick-release axle should also
be lightly lubricated regularly with resin-free sewing machine oil.
• If your wheelchair gets wet, towel dry it as soon as possible.
• Do not use your wheelchair in salt water and keep sand or other particles from damaging
the wheel bearings.
• Screw connections should be checked frequently, in particular when beginning to use the
wheelchair and after any adjustment. If a screw connection becomes loose repeatedly, con-
sult your dealer.

7.2 Cleaning and disinfection

Clean the padding and upholstery with warm water and a washing-up liquid. Remove spots with
a sponge or a soft brush. Rinse with clear water and let the components dry.
INFORMATION
INFORMATION
For disinfection, water-based agents should be used. The manufacturer's instructions for use
must be observed.
INFORMATION
Plastic parts, frame parts as well as chassis and wheels can be cleaned with a mild detergent.
Dry thoroughly.
70 | Ottobock
Downloaded from www.Manualslib.com
Do not use any aggressive cleansing agents, solvents, or hard brushes etc.
No wet-cleaning. No machine-wash.
Before disinfecting, the pads and handles must be cleaned.
manuals search engine
before each use monthly
X
X
quarterly
X
X
Motus CV/CS