How To Connect The Antennae; Audio Connection; Power Supply - Beyerdynamic MCW-D 50 Bedienungsanleitung

MCW-D 50 Control Unit
3.2.2

How to connect the Antennae

• Connect the receiving antennae to the antenna inputs A and B
• Connect the transmitting antenna to the antenna output
• For stand-alone-operation we recommend using the CA 2411 angled rod antenna.
Important:
• There must be an unobstructed path between the microphone units and the antennae, i.e. between the
MCW-D 50 control unit and the microphone units there must not be any obstacles. The range is around
30 - 50 m. For optimum range the surface of the table is important, wood or plastic tables are ideal, but metal tables
can cause interferences and reduce the range.
3.2.3

Audio Connection

• Connect the XLR
• Always route cables running to the unit where they will not be pinched or cut by heavy or sharp objects.
3.2.4

Power Supply

• Verify that the voltage rating of the unit matches that of the AC mains outlet you are to use. If you connect the unit to the
wrong voltage, you may seriously damage it.
• Always route cables running to the unit where they will not be pinched or cut by heavy or sharp objects.
• Connect the MCW-D 50 control unit to the mains
matically between 100 V and 240 V at 50 - 60 Hz.
E
32
Downloaded from www.Manualslib.com
19
or RCA master output to the input of a mixing console/amplifier.
15 11
manuals search engine
19 .
20 .
20
11 15
. The internal power supply unit of the control unit can adjust auto-
18
19
18 18