Front Panel Elements - ABB RLM01 Inbetriebnahmeanweisungen

Commissioning

3.2 Front panel elements

10
Three Sub-D connectors A, B and M are located on the front panel of the RLM 01 for
connection of the PROFIBUS cable. The 8-pin male multi-pin connector with the
associated terminal strip is used to connect the alarm and power supply wires.
There are also LEDs for activity/error display, a rotary switch for setting the transmis-
sion rate and a reset button (activate transmission rate).
Fig.: Front panel of the module
3BDD011600R05