Angelcare AC-SP Bedienungsanleitung Seite 10

FOR MODEL AC310
1
TO TEST THE SENSOR PAD:
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
MOVEMENT ALARM
• Alarm activates when no
movement is detected by the
Sensor Pad for 20 seconds.
• Both the Parent Unit and the
Camera speakers will emit
warning sound.
• Movement Alarm icon will show
on the LCD screen.
10
2:04 18°C
3
2:04 18°C
5
1) After activating the Sensor Pad, the alarm
2) Rub you hand over the mattress and confirm the
2
1) Press the Menu button
access the main menu.
2) Use the down arrow
the Sensor Pad settings menu.
3) Press the
Sensor Pad settings menu. Press
the
the Sensor Pad (the toggle button
will turn blue).
4) Press the down arrow
The Save icon at the bottom will
4
be highlighted.
5) Press the
settings (icon will turn blue).
should go OFF after 20 seconds.
alarm stops.
IF THE ALARM DOES NOT SOUND
• Avoid contact with the cot while Sensor
Pad is in operation.
• Place the cot near a supporting wall to
reduce vibrations.
• Adjust the Sensor Pad sensitivity level.
• Turn OFF cot mobile, fans, loud music
or anything else that may cause
vibration.
to
to select
button to access the
button again to activate
twice.
button to save the