Technical Data - SATA SATAjet 3000 K RP Betriebsanleitung

SATAjet 3000 K (RP/HVLP) Operating Instructions
US
[1-6] Air piston (not visible)
Compressed air connection,
[1-7]
G ¼ (male thread)
ColorCode-System (CCS)
[1-8]
Paint spray gun handle
[1-9]
[1-10] Trigger
6.2. Air micrometer (air flow control)
SATA adam 2 (see 14)
[3-1]
Separate pressure gauge
[3-2]
with regulator (see 14)

7. Technical Data

Description
Recommended spray gun
inlet pressure
Recommended Compliant
gun supply pressure
Recommended Compliant
gun supply pressure; legisla-
tion in Lombardy, Italy
Max. spray gun inlet pressure
(air)
Max. spray gun inlet pressure
(material)
Recommended spray dis-
tance, SATAjet 3000 K
Recommended spray dis-
tance, SATAjet 3000 K, Lom-
bardy, Italy
Air consumption,
SATAjet 3000 K
Max. material temperature
524
[1-11] Material connection, G⅜ "
(male thread)
[1-12] Nozzle set consisting of air
cap, fluid tip (not visible),
paint needle (not visible)
Separate pressure gauge
[3-3]
without regulator (see 14)
[3-4] Pressure measurement at
compressed air circuit
RP
35 psi
See label/information on spray gun
6.7" - 8.3"
15.2 cfm at 2,5 bar 19.8 cfm at 2,5 bar
– > 35 psi (air cap
pressure > 10 psi)
– < 44 psi (air cap
pressure < 15 psi)
145 psi
3.9" - 5.9"
– 3.9" - 5.9"
122 °F
HVLP
35 psi