Technical Data - SATA SATAjet 3000 K RP Betriebsanleitung

Operating Instructions SATAjet 3000 K (RP/HVLP)
EN
[1-6] Air piston (not visible)
Compressed air connection
[1-7]
G ¼ „ (male thread)
ColorCode-System (CCS)
[1-8]
Spray gun handle
[1-9]
[1-10] Trigger
6.2. Air micrometer (aif flow control knob)
SATA adam 2 (see
[3-1]
chapter 14)
[3-2] Separate pressure gauge
with control device (see
chapter 14)

7. Technical Data

Description
Recommended spray gun
inlet pressure
Recommended gun input
pressure Compliant
Recommended gun input
pressure Compliant legisla-
tion Lombardy/Italy
Max. gun input pressure (air)
Max. gun input pressure (ma-
terial)
Recommended spray dis-
tance SATAjet 3000 K
Recommended spray dis-
tance SATAjet 3000 K Lom-
bardy/Italy
Air consumption
SATAjet 3000 K
Max. material temperature
128
[1-11] Material connection G⅜ „
(male thread)
[1-12] Nozzle set consisting of air
cap, fluid tip (not visible),
paint needle (not visible)
Separate pressure gauge
[3-3]
without control device (see
chapter 14)
[3-4] Pressure measurement in
compressed air circuit
RP
2.5 bar
–
–
see marking/details on the gun
17 cm - 21 cm
–
430 Nl/min at 2,5
bar
HVLP
2.5 bar
> 2.5 bar (air cap
pressure > 0.7 bar)
< 3.0 bar (air cap
pressure < 1.0 bar)
10.0 bar
10 cm - 15 cm
10 cm - 15 cm
560 Nl/min at 2,5
bar
50 °C