A-10
MAKING CONNECTIONS
Assembling the AV cover
(Only 98UB98**)
1
Insert the cover holder attached to the AV port cover
into the hole of the main body of the product as
illustrated.
2
Attach the port cover onto the AV port part. (The
cover remains attached through the use of a
magnet.)
1
AV Port Cover
Cover Holder
2
CAUTION
If you do not attach the cover holder, the cover
may fall off and cause injury.
MAKING CONNECTIONS
This section on MAKING CONNECTIONS mainly uses
diagrams for the UB85** models.
Antenna Connection
(*Not Provided)
Wall Antenna Socket
English
Connect the TV to a wall antenna socket with an RF
NOTE
Use a signal splitter to use more than 2 TVs.
If the image quality is poor, install a signal
amplifier properly to improve the image quality.
If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
An antenna cable and converter are not supplied.
Supported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
IN
ANTENNA / CABLE