Configuring Picture Option - Samsung LE37A556 Bedienungsanleitung

Configuring Picture Option

1. Press the MENU button to display the menu.
Press the ENtER
2. Press the ▲ or ▼ button to select "Picture Options", then press
the ENtER button.
. Select the required option by pressing the ▲ or ▼ button, then
press the ENtER
. When you are satisfied with your setting, press the ENtER
button.
. Press the EXIt button to exit.
➣
In PC mode, you can only make changes to the "Colour
Tone" and "Size" from among the items in "Picture Options".
♦ Colour tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
➣
The adjusted values are stored according to the selected
"Picture" mode.
➣
"Warm1" or "Warm2" is only activated when the picture mode is "Movie".
♦ Size: Auto Wide/1:/Wide Zoom/Zoom/:/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
♦ Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
♦ 1:: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦ :: This is the default setting for a video movie or normal broadcasting.
♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/
1080p) or Component (1080i/1080p) signals are input.
➣
"Auto Wide" function is available only in "TV", "DTV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.
➣
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
➣
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
➣
Temporary image retention may occur when viewing a static image on the set for more than two
hours.
➣
"Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting the
pressing the ► or ENtER
➣
"Zoom": Select
and down. After selecting
vertical direction.
➣
When Double (
➣
After selecting "Just Scan" in hDMI (100i/100p) or Component (100i/100p) mode:
Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select "Reset", then press the ENtER
You can initialize the setting.
You can select these options by simply pressing the P.SIZE
button on the remote control.
button, to select "Picture".
button.
button.
by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up
, use the ▲ or ▼ button to magnify or reduce the picture size in the
, ) mode has been set in PIP, the Picture Size cannot be set.
English - 20
tV
Picture
More
Picture Options
Reset : OK
Move Enter
tV Picture Options
Colour tone : Normal
Size : Auto Wide 
Screen Mode : 1:
Digital NR : Auto
DNIe : Off
hDMI black Level : Normal
Movie Plus : Low
blue Only Mode : Off
Move Enter
button.


Return







Return
by