Configuring Picture Options - Samsung 7 Serie Bedienungsanleitung

Configuring Picture Options
Activating Picture Options
1.
Press the MENU button to display the menu.
Press the ENTER
2.
Press the ▲ or ▼ button to select "Picture Options", then press the
ENTER button.
Press the ▲ or ▼ button to select a particular item. Press the ENTER
➣
button.
When you are satisfied with your setting, press the ENTER
➣
In PC mode, you can only make changes to the "Colour Tone" and "Size"
➣
from among the items in "Picture Options".
Colour Tone: Cool2/Cool/Normal/Warm/Warm2

You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected "Picture" mode.
➣
"Warm1" or "Warm2" is only activated when the picture mode is "Movie".
➣
Size: Auto Wide/:/Wide Zoom/Zoom/4:/just Scan

You can select the picture size which best corresponds to your viewing
requirements.
• Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
• :: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
• Wide Zoom: Magnify the size of the picture more than 4:3.
• Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
• 4:: This is the default setting for a video movie or normal broadcasting.
• just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p) or Component
(1080i/1080p) signals are input.
"Auto Wide" function is available only in "TV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.
➣
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
➣
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
➣
Temporary image retention may occur when viewing a static image on the set for more than two hours.
➣
"Wide Zoom": Press the ► button to Select "Position", then press the ENTER
➣
to move the screen up/down. Then press the ENTER
"Zoom": Press the ► button to Select "Position", then press the ENTER
➣
move the picture up and down. Then press the ENTER
the ENTER button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then
press the ENTER
When Double (
➣
After selecting "just Scan" in HDMI (00i/00p) or Component (00i/00p) mode:
➣
Select "Position" by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select "Reset", then press the ENTER
If you use the "Just Scan" function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
➣
overscan function.
You can select these options by simply pressing the P.SIZE button on the
O
remote control.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select "Picture Size".
3.
Press the ◄ or ► button to select the required option.
4.
Press the EXIT or TOOLS button to exit.
button to select "Picture".
button.
, ) mode has been set in PIP, the Picture Size cannot be set.
button.
button.
button. Press the ► button to Select "Size", then press
English - 2
Tint (G/R) : G50/R50
Detailed Settings
Picture Options
Picture Reset
Picture Options
Colour Tone : Normal
Size : Auto Wide
Screen Mode : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Medium
Movie Plus : Off
▼
Move Enter
button. Press the ▲ or ▼ button
button. Press the ▲ or ▼ button to
button. You can initialize the setting.
Tools
Anynet+ (HDMI-CEC)
Picture Size ◄ Auto Wide ►
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l ll : Mono
Move Adjust e
►
►
Return
Exit