Using Mini Heki S - Dometic Mini Heki S Montage- Und Bedienungsanleitung

Using Mini Heki S

See fig. a
➤ Fit the inner frame into the mounting frame.
See fig. b
➤ Push the inner frame onto the mounting frame.
➤ After installing, check the roof light works properly.
➤ Remove the protective film from the acrylic glass.
I
➤ If necessary, enter the new vehicle height and weight in the vehicle doc-
uments.
8
8.1
➤ Open and close the roof light as shown.
8.2
A
I
➤ Hold the recessed handle of the roller blind and pull it into the required po-
sition.
14
Downloaded from www.Manualslib.com
NOTE
If the protective film is exposed to sunlight for too long, it cannot be
taken off without leaving a residue.
Using Mini Heki S
Opening and closing the Mini Heki S (fig. c to
fig. e)
Opening and closing the roller blinds (fig. f)
NOTICE! Risk of damage due to a build-up of heat between
the roller blind and the window.
In strong sunlight, only close the blackout roller blind two thirds of
the way.
NOTE
You can adjust the blackout roller blind and the flyscreen
separately.
manuals search engine
Mini Heki S
EN