Instructions Before Installation - Dometic Mini Heki S Montage- Und Bedienungsanleitung

Instructions before installation

6
➤ Before installation, check the roof thickness of your vehicle. Consult the
vehicle manufacturer if you have any questions.
➤ When choosing the installation location, observe the following:
– Adjoining components (roof rack or attachment and reinforcing parts),
– Only fit the roof light on flat and parallel interior and exterior roof areas
– You may use an existing roof hole provided the roof light fits into it.
6.1
See fig. 2
6.2
Supplementary to fig. 3
➤ Before installation, check whether the roof hole needs reinforcing.
➤ Remove the foam according to the width of your reinforcing rail (not in
scope of delivery) (A).
➤ Fit the reinforcing rails (B).
12
Downloaded from www.Manualslib.com
Instructions before installation
cables and cabinets in the vehicle interior must not be damaged when
sawing the hole.
with a maximum inclination of 15° to the horizontal.
Pressing out the hole
Using the reinforcing rails
manuals search engine
Mini Heki S
EN