• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories (with a soft
cloth with warm water and cleaning
agent) after each use and let them dry.
• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It
can destroy nonstick coating!
Pyrolytic cleaning
With the function Pyrolytic , you can clean
the oven using pyrolysis. Set the function in
the menu Cleaning .
Warning! The appliance becomes very
hot. There is the risk of burns.
Important! Before you start the function
Pyrolytic , remove all the removable parts
(the shelf support rails, the accessories,
etc.) from the appliance.
1. Activate the appliance.
2. Touch
ing . Touch OK .
3. Touch
lytic . Touch OK .
4. Touch
the cleaning.
– LIGHT - for a low level of dirt (2:15)
– NORMAL - for a medium level of dirt
(2:45)
– INTENSE - for a high level of dirt (3:15)
– AUTO - the appliance automatically
calculates which pyrolytic cycle to use.
5. The display shows the messages.
Touch OK after each message.
When the appliance operates at preset
temperature, the door locks .
When the pyrolytic cycle starts, the
oven lamp does not work and the cool-
ing fan works at a higher speed.
Do not open the door during the heating up
time. If you open the door, you cancel the
pyrolytic cleaning cycle.
To stop the pyrolytic cleaning cycle, touch
.
Do not use the appliance until the door lock
symbol is off.
Downloaded from
www.Manualslib.com
or
to set the menu Clean-
or
to set the function Pyro-
or
to set the duration for
manuals search engine
Cleaning reminder
It shows you when to do the cleaning. It
shows the message on the display after
some hours of the appliance operation.
Activate and deactivate the Cleaning remind-
er function in the menu Cleaning . The Clean-
ing reminder function deactivates when you
set the appliance to the factory settings.
Cleaning the oven door
The oven door has four panels of glass.
You can remove the oven door and the in-
ternal panels of glass to clean them.
Removing the oven door and the glass
panels
1. Fully open the door and identify the
hinge to the left side of the door.
2. Push the tightening component until it
pulls back.
3. Hold the pushed component with one
hand. Use a screwdriver with the other
hand to lift and turn the left side hinge
lever.
electrolux 17