Troubleshooting - Asus GigaX1105N Schnellstartanleitung

Troubleshooting

This section provides solutions to some common problems which you may
encounter when installing or using the ASUS GigaX1105N or GigaX1108N
switch. Contact the ASUS technical support if problem still exists after you have
performed the troubleshooting solutions.
Problem
The POWER LED does not light
up.
The LAN LED does not light up
even after a network device is
connected to the port
Solution
Check if the power cable is properly
connected to the switch and to an
power outlet.
• Check if the Ethernet cable is
properly connected to the switch
and to the network device.
• Make sure the switch and your
network device are powered ON.
• Check if the Ethernet cable meet
your network requirements. To
connect gigabit switch port, you
need Category 5 cable to get
gigabit transfer speed.
Quick Start Guide 7