Safety And Information Signs; Optional Accessories - Angelo Po 0G1CP1G Bedien- Und Installationshandbuch

SAFETY AND INFORMATION SIGNS

The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)Burn hazard: watch out for hot surfaces.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: read the manual carefully before
carrying out any procedure.
E)General hazard: dry operation is forbidden.
F) General hazard: all relevant regulations must be
complied with. "Install in compliance with the rel-
evant regulations and use in well ventilated
premises only".
G)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to comply with the installation and com-
missioning instructions".
H)CE marking: indicates that the appliance is compli-
ant with the relevant norms.

OPTIONAL ACCESSORIES

The appliance can be equipped with the following
accessories on request.
A)Set of baskets KCP40
B)Basket C0909
C)Basket C2715
D)Basket C0930
E)Basket C1830
F) Basket C2830
G)Basket C4627
H)Basket C2327
L) Feet
M)Type B11 (MT30) tall fume exhaust vent (for ver-
sion 0G1CP1G - 1G1CP2G only)
Type B11 (MT50) tall fume exhaust vent (for ver-
sion 1G1CP1G only)
N)Type B11 tall fume exhaust vent with draught
damper device MB30 (for version 0G1CP1G -
1G1CP2G only)
Type B11 tall fume exhaust vent with draught
damper device MB50 (for version 1G1CP1G on-
ly)
P)Well lid CV26 (for version 0G1CP1G - 1G1CP2G
only)
C D E
M)General hazard: drain the well completely after
use.
M
L
E
D
A
Well lid CV40 (for version 1G1CP1G only)
- 5 -
B
G
M
F
IDM-39614900501.tif
N
H
G
F
C
B
IDM-39614600600.tif
H
A
IT
GB
DE
FR
ES
P
English