Specifications; Safety Precautions - Carson BLUSTER 400 507012 Betriebsanleitung

Specifications:

GB
RTF (ADVANCED)
Length: 670 mm
Height: 210 mm
Diameter for main rotor: 655 mm
Diameter for tail rotor:
Weight: 555 g
Sender: 6 channels
Receiver: 6 channels
Gyro: isolated hightech gyro

Safety Precautions

General
• Read the Operating Manual carefully and keep it for future
reference.
This model is not a toy!
• This radio controlled model is not a toy. Learning how to
control it correctly is a gradual process.
• Children under 14 years of age should be supervised by an
adult.
Driving a radio controlled car is a fascinating hobby. However, it
has to be practised with the necessary caution and respect.
A radio controlled model car can cause damage and injury and
the user is liable for any such incident.
Caution
R/C modeling is a hobby with high technology and should
not be considered a children's toy. There is risk involved during
the operation of this product and the user should take all
precautions seriously or serious bodily injury may result.
Note
As with any R/C product there are risks involved when flying
this model. A beginner should seek the help of a qualified
skilled R/C pilot to ensure that the model is airworthy and
capable of safe operation.
Note
If the 3D flight mode is selected (the right hand side switch in
3D position) when the Tx is turned on, the throttle will have no
function.
The motor will not start even if you move from full back to zero
throttle.
4 CARSON 3D Helicopter Bluster 507012
152 mm
Brushless motor: Carson HELI-X B20/10 T
Brushless motor speed controller: Carson HELI-X 18A
Li-poly battery: 1800 mAH/ 11.1V
Servo: 4x micro servos 9g
*Specifications may change without notice.
• Make yourself familiar with all the instructions for flight
operation.
Make sure that you have sufficient insurance cover when prac-
tising your hobby.
Only a well maintained model will function in a correct manner.
Only use approved spare parts and never improvise with any
unsuitable items.
It is the user's responsibility to ensure that the model is functio-
ning correctly and that all nuts, bolts and screws are properly
tightened.
Improper disassembly, improper adjustments and setup can
lead to unsatisfactory or unsafe operation. If you have any
questions regarding the use, maintenance, or safe operation of
this model, please contact your local retailer.
Any damage, neglect, or unfamiliar use of this product can
cause unexpected accidents or injury. Be sure to read this
manual and follow all of the safety notes. Remember this is
not a toy and children should be supervised prior to starting or
flying this helicopter.
In order to start the motor, the Tx must be in normal flight
mode (the right hand side switch in nor position) when the Tx
is turned on. Also the throttle must be in zero before the motor
can be started.