Pelgrim PSM220WIT Anleitung Seite 39

OPErAtION
Auto cook
1.Brood 2.Soep 3.Aardappelen
Auto cook
4.Groente 5.Bevroren groente
1.Brood 2.Soep 3.Aardappelen
4.Groente 5.Bevroren groente
Auto cook
1.Brood 2.Soep 3.Aardappelen
4.Groente 5.Bevroren groente
3. Press the time/weight button to set the right weight or the right
defrosting time.
▷ Take note: the 2-phase function only works if the weight
is set at 200 grams or more!
In the display you see the set weight or the set defrost time.
4. Press the power button to set the power.
'P-H1' appears in the display.
▷ Press the power button again (a number of times) if you wish
to set a different power.
5. Press the time/weight button to set the right time.
The display indicates the set time.
▷ You can set a time up to 59 minutes and 90 seconds.
Each press of the button increases the time in steps of
10 minutes, 1 minute and 10 seconds respectively.
6. Press the start button.
The microwave switches on and firstly the defrost time counts
down automatically in the display.
▷ During defrosting a beep sounds to alert you to check or
turn over the food.
7. Open the door; the microwave switches off.
8. Close the door after checking/turning over, press the start
button and the microwave continues further with the set
programme.
▷ When defrosting has finished, the time you set for heating
counts down in the display.
▷ When the total programme is finished, three beeps are given.
The microwave switches off.
• While a programme is still running, the remaining time is always
visible in the display.
• If you press the power button during a programme, the set
power appears in the display for 3 seconds.
• If you press the weight/defrost button or the time/defrost button
during a defrosting process, 'DEF' appears in the display for
3 seconds.
EN 17