Danfoss VLT Advanced Harmonic Filter AHF 005 Projektierungshandbuch Seite 84

Spezifikationen
PE M12 (25Nm)
167.5±1.0 mm [6.6±0.04 in]
7 7
Abbildung 7.32 IP20 X8-V3 Externer Lüfter
X3/X4 Capacitor disconnect 120mm (18Nm)
X1 Mains 300mm (50Nm)
Abbildung 7.33 IP20 X8-V3 Externer Lüfter, Klemmenbezeichnung und 3D-Ansicht
82
240±1.0 mm [9.4±0.04 in]
9±2.5 mm [0.4±0.10 in]
A/B Temperature 2.5mm (0.8Nm)
X2 Drive 300mm (50Nm)
Danfoss A/S © 05/2019 Alle Rechte vorbehalten.
®
VLT Advanced Harmonic Filter AHF 005/AHF 010
715±2.5 mm [28.1±0.10 in]
240±1.0 mm [9.4±0.04 in]
300±1.0 mm [11.8±0.04 in]
9±2.5 mm [0.4±0.10 in]
800±4.0 mm [31.5±0.16 in]
957.5±4.0 mm [37.7±0.16 in]
420±2.5 mm [16.5±0.10 in]
468±2.5 mm [18.4±0.10 in]
12±1.0 mm [0.5±0.04 in]
8 holes must be used to fix the AHF
with M8 screws
M0010801