Installation and connection
q Please observe the special installation instructions.
q This oven is intended for built in use only. It is not
intended for counter top use or for use inside a
cupboard.
q The appliance can be installed in a 60 cm wide
high sided unit (at least 85 cm above the floor).
q The appliance is fitted with a plug, and must only
be connected to a properly installed socket outlet
with earthing contact. The fuse protection must
comprise 10 amperes (automatic circuit breaker
with trigger characteristic L or B). The mains
voltage must correspond with the voltage specified
on the nameplate.
q The installation of the socket or replacement of the
connecting cable must only be carried out by
a qualified electrician. If the plug is no longer
accessible subsequent to installation, an all pole
disconnecting device must be present on the
installation side with a contact gap of at least
3 mm.
q Multiple plugs, plug connectors and extension
cables must not be used. Overload can lead to
a fire hazard.
33