Cleaning And Care - Silvercrest SWKC 2400 C2 Bedienungsanleitung

NOTE
► When filling it, hold the kettle upright. This is the only way to read the
markings on the scale
3) Fill the jug at least as far as the 0.7 l mark, so that the appliance does not
overheat, and no more than the MAX mark to ensure that no boiling water can
spill out.
4) First close the lid
that it sits securely on the base
5) Now insert the plug into the mains power socket.
6) Push the ON/OFF switch
switch
WARNING! RISK OF INJURY!
► For safety reasons, you should never remove the lid
boiling or is very hot. There is a risk of scalding.
7) As soon as the water is boiling, the appliance will switch itself off, the
ON/OFF switch
INFORMATION
► This appliance is fitted with an overheating protector: if the appliance is
switched on accidentally, without any water in the kettle, the appliance
automatically switches itself off.
If, for example due to a non-closed lid
appliance switches off automatically.
In such cases first allow the appliance to cool down before using it again.

Cleaning and Care

RISK! ELECTRICAL SHOCK!
► Before cleaning, ALWAYS remove the plug from the mains power socket!
There is the risk of receiving an electric shock!
► Do not open any part of the housing. There are no user-serviceable
elements inside. An open housing will create the risk of a potentially fatal
electrical shock.
NEVER submerse the appliance in water or other liquids! You could
receive a fatal electric shock if residual liquids come into contact with
live components during operation.
│ GB │ IE
■ 20
correctly.
and then place the kettle on the base
downwards so that it engages. The ON/OFF
lights up.
clicks upwards and the light goes out.
.
the appliance boils dry, the
in such a manner
when the water is
SWKC 2400 C2