Ryobi RLM15E36H Übersetzung Der Originalanleitung Seite 5

bolts in sets to preserve balance.
■ The blade on the product is very sharp.
Use extreme caution and wear heavy duty
gloves when fitting, replacing, cleaning or
checking bolt security.
■ Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
■ Check all nuts, bolts, and screws at
frequent intervals for proper tightness to
be sure the equipment is in safe working
condition.
■ Check the grass catcher frequently for
wear, holes, or deterioration.
■ Replace worn or damaged parts before
operating the product.
■ The product must be started with the user
behind the handlebars in the operator
safety zone. Never start the product if:
● all four wheels are not on the ground
● the grass discharge chute is exposed
without being protected by either the
mulching plug and grass discharge
chute cover or the grass catcher and
grass discharge chute cover
● hands and feet of all persons are not
clear of the cutting enclosure
■ Never operate the product if the on/off
switch on the handlebar does not properly
start and stop the product.
■ Never attempt to lock the on/off switches in
the on position; this is extremely dangerous.
■ Do not force the product. It will do the job
better and safer at the speed for which it
was designed.
■ Stop the blade when crossing gravel
surfaces.
■ Do not pull the product backward unless
absolutely necessary. If you must back the
product away from a wall or obstruction,
fi rst look down and behind to avoid tripping
or pulling the product over your feet.
■ Stop the motor and allow the blade to stop if
the product has to be tilted for transportation
when crossing surfaces other than grass,
and when transporting the product to and
from the area to be mowed.
■ Never use the product with defective guards
or shields, or without safety devices, for
example, defl ectors, and/or grass catcher,
in place.
■ Do not tilt the product when switching on
the motor or while the motor is running.
This exposes the blade and increases the
probability of objects being thrown.
■ Switch on the motor carefully according to
instructions and keep hands and feet away
from cutting area. Do not put hands or feet
near or under rotating parts. Keep clear of
the discharge opening at all times. Do not
start the product when standing in front of
the discharge opening.
■ Never pick up or carry the product while it
is running.
■ Stop the motor and disconnect from the
power supply. Make sure all moving parts
have come to a complete stop:
● before leaving the product unattended
(including disposal of grass clippings)
● before clearing blockages or unclogging
the discharge chute
● before checking, cleaning, or working on
the product
● before removing the grass catcher or
opening the grass discharge chute cover
● after striking a foreign object (inspect
the product for damage and make
repairs as necessary before restarting
and operating the product)
● whenever the product starts to vibrate
abnormally (check immediately).
– inspect for damage, particularly the
blades
– replace or repair any damaged parts
– check for and tighten any loose parts
■ Avoid holes, ruts, bumps, rocks, property
stakes, or other hidden objects. Uneven
terrain could cause a slip-and-fall accident.
OVERLOAD PROTECTION DEVICE
The product has an overload protection
device. When overloading is detected, the
product will automatically switch off. If the
overload protector is actuated, the motor must
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English | 3