en
Technical specifications
Problem
Display shows
Please clean brewing unit,
then replace
Display shows
Please restart appliance
Display shows
Descaling insufficient.
Repeat process
Display shows
Please let appliance
cool down
Display shows
Error
Please contact hotline
If you are unable to solve the problem, always call the hotline!
You will find the telephone numbers at the back of these instructions�
Technical specifications
Power connection (voltage – frequency)
Power rating
Maximum static pump pressure
Maximum water tank capacity (without filter)
Maximum capacity of the coffee bean container
Length of power cable
Dimensions (H x B x D)
Weight, empty
Type of grinding unit
50
Cause
Brewing unit is soiled.
Too much pre-ground
coffee in the brewing unit.
The mechanism of the
brewing unit is stiff.
Appliance is too warm.
Brewing unit is soiled.
Incorrect or insufficient
descaler or excessive scale
existing on appliance.
Appliance is too hot.
The appliance has a fault.
Solution
Clean the brewing unit.
Clean the brewing unit. Place no
more than two level measuring
spoons of ground coffee in the
drawer.
Clean the brewing unit (see the
section "Daily maintenance and
cleaning").
Leave the appliance to cool
down.
Clean the brewing unit.
Perform descaling programme
again.
Switch off appliance for 30
minutes.
Please contact the hotline.
220-240 V – 50/60 Hz
1500 W
15 bar (TE651.., TE653.., TE654..)
19 bar (TE655.., TE657..)
1.7 l
~300 g
100 cm
385 x 301 x 458 mm
10-12 kg
Ceramic