DO NOT THROW AWAY
THESE INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE (FIG.1)
A
Lever to open the dust bag compartment
B
Bag full indicator
C Cord re-wind switch
D Carry handle
E
On/Off switch
F
Dust bag compartment
G Paper dust bag
H Flexible hose
I
Narrow suction nozzle with brush
L
Telescopic tube
M Release buttons
N Hand grip
O Suction control
P
Floor brush
Q Hard floors/carpet selector
VACUUM CLEANER ASSEMBLY
Insert the hose into the suction opening, pressing it down until it slots into place. To remove the hose,
press the two release buttons together and pull it out (FIG. 2).
CAUTION: Before fitting or removing attachments, always be sure to unplug the appliance from the
mains power.
ATTACHMENTS
Telescopic tube (L)
Insert the extension tube onto the handgrip and then fit the required attachment, such as the crevice
nozzle or the small cleaner. Once the attachment has been inserted, it is possible to extend the
telescopic tube to the required length using the lever (FIG. 3). Release the lever to secure the tube
at the required length.
Floor brush (P)
- Suitable to clean large areas as well as those corners that are hard to reach
- We advise against using the brush on carpets or hard floors. To retract the brush, press the power
lever marked with the carpet symbol
- For better cleaning and preservation of smooth flooring, such as PVC, parquet or tiles, it is advis-
able to use the brush. To extract the brush, press the power lever marked with the smooth floor
symbol
.
.
- 9 -
EN