Safety And Intended Use - Mettler Toledo M100/2H DR Leitfaden Für Die Einrichtung

1

Safety and Intended Use

h
Note: The Quick Setup Guide is a brief operating instruction.
The M100 transmitter must only be installed, connected, commissioned, and maintained by
qualified specialists e.g. electrical technicians in full compliance with the instructions in this
Quick Setup Guide, the applicable norms and legal regulations.
The specialist must have read and understood this Quick Setup Guide and must follow the
instructions it contains. If you are unclear on anything in this Quick Setup Guide, you must
read the Operating Instructions (supplied on CD-ROM). The Operating Instructions provides
detailed information on the instrument.
The M100 transmitter should be operated only by personnel familiar with the transmitter and
who are qualified for such work.
Intended Use
The M100 DIN rail transmitter is a 2-wire transmitter for analytical measurements with HART
communication capabilities. The M100 is a 1-channel, multi-parameter unit for pH/ORP, con-
ductivity and dissolved oxygen measurement. It is only compatible with ISM
The M100 transmitter is designed for use in the process industries, in non-hazardous areas.
M100 parameter fit guide
Parameter
pH/ORP
pH/pNa
Conductivity 4-e
Amp. Dissolved Oxygen ppm / ppb / trace
1) INGOLD and THORNTON sensors
2) THORNTON sensors
en
34
sensors.
®
M100/2H DR
ISM
•
•
•
• / • / •
1) 2) 2)