Electrolux EWN 148640 W Benutzerinformation Seite 8

8 electrolux
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent re-
quired, pour it into the main wash compart-
ment or in the appropriate compartment
if the selected programme/option it requires
(see more details in «Detergent dispenser
drawer»).
If required, pour fabric softener into the com-
partment marked
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
Select the required programme
Turn the programme selector dial ( 1 ) to
the required programme. When the appli-
ance is switched on, a friendly jingle can be
heard, at the same time the brand logo ap-
1) With Cottons , Synthetics and Delicates programmes only.
(the amount used
pears on the display and, for few seconds,
a short description of the selected pro-
gramme is shown in last 2 rows of the dis-
play.
After having selected the programme, the
appliance will propose on the display ( 2 )
the following information:
2.1 temperature
2.2 spin speed
2.3 selectable option icons
1)
2.4 soil degree
2.5 washing programme duration
2.6 the estimated time end of washing cycle
2.1 2.2
The button 7 starts blinking.
The selector dial can be turned either clock-
wise or anticlockwise. Position O to Reset
programme/ Switching OFF of the machine.
At the end of the programme the selec-
tor dial must be turned to position O, to
switch the machine off.
Important! If you turn the programme
selector dial to another programme when
the machine is working, the display says to
turn programme selector in the last used
position.
The machine will not perform the new selec-
ted programme.
Display
The DISPLAY is used for setting a large
number of functions and combine them
with each other using only a few con-
trol elements (1 programme selector di-
al and 8 buttons). This simple control
method is made easy thanks to the in-
teractive display. Interactive means that
the appliance display changes to reflect
each step you have entered. This en-
sures to set the possible settings only.
You are able to see the current settings
at any time in the information panel and
in the option rows.
2.5
2.3 2.4 2.6