Siemens MQ6-Serie Gebrauchsanleitung Seite 7

MQ6-Zubehör_de-ar.book Seite 7 Dienstag, 13. Januar 2015 5:45 17
Caution!
Before cutting meat, remove gristle, bones
and sinews.
The universal cutter is not suitable for cutting
very hard items (coffee beans, radishes,
nutmeg) and frozen food (fruit, etc.).
Fig. 
Place the universal cutter on a smooth,

clean work surface and press.
Insert the blade.

Add food.

Warning!
Blade must sit straight in the universal
cutter so that the attachment sits correctly
(Fig.=  -3).
Place the attachment on the universal

cutter and rotate in a clockwise direction
until it "clicks" into position.
Place the base unit on the attachment

and lock into position.
Insert the mains plug.

Hold the base unit and universal cutter

firmly and switch on the appliance (Turbo
speed).
Release the On button after processing.

After using the appliance
Remove mains plug.

Press the release buttons and remove

the base unit from the attachment.
Rotate the attachment in an anti-

clockwise direction and remove from the
universal cutter.
Take hold of the blade by the plastic

handle and take out.
Place the lid on the universal cutter to

keep in the processed ingredients.
Cleaning
Warning!
Never immerse the attachment of the uni-
versal cutter in liquids and do not clean under
flowing water or in the dishwasher.
Universal cutter and blade are

dishwasher-proof.
Wipe the attachment with a damp cloth

only.
Whisk
Please fold out the illustrated pages.
Fig. 
5 Gear attachment for whisk
6 Whisk
A whisk can be ordered from customer service
(order no. 657428).
Operation
The whisk is suitable for whipping cream,
beating egg whites and milk froth (from hot
(max. 70 °C) and cold milk (max. 8 °C))
as well as for preparing sauces and desserts.
Risk of scalding!
When processing hot milk, use a tall, narrow
receptacle for blending. Hot milk may splash
and scald you.
Fig. 
Put ingredients into the blender jug.

Place the gear attachment on the base

unit and lock into position.
Insert the whisk into the gear attachment

and lock into position.
Warning!
Never insert the whisk into the base unit
without the gear attachment (Fig.=  -3).
Set required speed using the speed

control (if fitted) (recommendation:
high speed).
Grip base unit and blender jug and press

required On button.
Release the On button after processing.

After using the appliance
Remove mains plug.

Press the release buttons and remove

the base unit from the gear attachment.
Remove the whisk from the gear

attachment.
Cleaning
Warning!
Never immerse the gear attachment in liquids
and do not clean under flowing water or in the
dishwasher.
The whisk can be cleaned in the

dishwasher.
Wipe the gear attachment with a damp

cloth only.
en
7