Basic Settings; Accessing The Default Settings - Bosch PIA6-T1-Serie Montageanleitung

Basic settings

The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator Function
™‚
Childproof lock
‹
Off.*
‚
On.
™ƒ
Audible signals
‹
)Confirmation signal and error signal switched off.
‚
Only error signal switched on.
ƒ
Confirmation signal and error signal switched on.*
™†
Automatic time limitation.
‹
Switched off.*
‚
- 99 Automatic shut-off time.
™‡
Duration of the time program function warning signal
‚
10 seconds.*
ƒ
30 seconds.
„
1 minute.
™ˆ
Power-Management function
‹
= Deactivated.*
‚
= 1,000 W. minimum power.
‚
= 1,500 W.
ƒ
= 2,000 W.
etc.
Š Š
or . = maximum power of hob.**
™‹
Return to basic settings
‹
Personal settings.*
‚
Return to factory settings.
*Factory settings
**The hob's maximum power depends on the configuration of the installation's connection intensity. To not exceed this maximum
value, the hob includes a series of components that automatically control the power, distributing it between the hotplates in use
as required.

Accessing the default settings

The hob must be turned off.
Switch on the hob.
1.
In the following 10 seconds, press and hold the
2.
for 4 seconds.
™‚
appears on the left of the screen and
@
Press the symbol several times until the indicator for the
3.
required function appears.
4. Then choose the required setting using the + and - symbols.
@
symbol
Push the
5.
seconds.
The settings have been properly saved.
Quit
‹
To leave the basic settings, turn off the hob at the main switch.
on the right .
@
symbol again and hold it for longer than 4
29