7�8 Adding A Camera; 7�9 Deleting A Camera - Beurer BY 110 Gebrauchsanweisung

• Confirm using the ( OK ) button�
7.8 Adding a camera
You can connect one parent unit with up to four cameras�
To add a camera to the parent unit, proceed as follows:
• Press the (
• Use the direction buttons (
• Use the direction buttons (
• Confirm using the ( OK ) button�
• 1, 2, 3, 4 appears on the screen�
• Use the direction buttons (
the ( OK ) button�
for a camera�
• Now hold down the PAIR button on the rear of the camera until an acoustic
signal is heard and the transmission image from the camera that has been
added appears on the screen�
Note
• Order information for the additional camera can be found in Chapter „10�
Accessories and replacement parts"�
7.9 Deleting a camera
If you wish to delete the connection to a camera, proceed as follows:
• Press the (
• Use the direction buttons (
• Use the direction buttons (
• Confirm using the ( OK ) button�
• 1, 2, 3, 4 appears on the screen�
• Use the direction buttons (
that you wish to delete�
• Confirm using the ( OK ) button�
) button�
appears on the screen and the unit searches
) button�
) / ( ) to select menu item
) / ( ) to select the plus
) / ( ) to select a number and confirm with
) / ( ) to select menu item
) / ( ) to select the minus
) / ( ) to select the number of the camera
36
�
+.
�
—
�