Getting Started; Battery Installation - Topcom Twintalker 1300 Bedienungsanleitung

7

GETTING STARTED

8 BUTTONS
TOPCOM TWINTALKER 1300
Downloaded from www.Manualslib.com
SC
TX RX
manuals search engine
7.1 REMOVING/INSTALLING THE BELT CLIP
1.To remove the clip from the unit, push the belt clip (2) towards
the antenna, while pulling the clip tab (1).
2.When re-installing the belt clip, a click indicates the BeltClip is
locked into position.

7.2 BATTERY INSTALLATION

1.Remove the belt clip (§ 7.1).
2.Pull the battery door tab down (3) and slide the battery cover
away from the antenna. (4)
3.Install 4 'AAA' alkaline or rechargeable batteries following the
polarity as shown.
4.Re-install the Battery Cover and Belt Clip (§ 7.1).
1.ANTENNA
2.LCD Display
3.SPEAKER/MIC/CHARGER Connector
4.LOCK button
5.MONITOR button
6.CALL button
- Transmit a call tone
7.SPEAKER
8.MICROPHONE
9.DOWN button
- Decrease the speaker volume
- Select the previous item in the menu.
10.MENU button
- Enter menu.
11.PUSH TO TALK button
- Press To Talk or release to listen
- Confirm a setting in the menu
12.UP button
- Increase the speaker volume
- Select the next item in the menu.
13.ON/OFF button
TOPCOM TWINTALKER 1300
PTT
5