Ingersoll-Rand UP Serie Ergänzungen Zur Betriebsanleitung Seite 4

2
FOREWORD AND SAFETY
UP SERIES ROTARY SCREW AIR COMPRESSOR
This unit was purchased from
Ingersoll–Rand Company reserves the right to make changes or add
improvements without notice and without incurring any obligation to
make such changes or such improvements to products previously
sold.
For ready reference:
Record the serial number and model number of your unit here:
Serial Number:
Model Number:
SAFETY AND WARNINGS
Refer to (Safety and Warnings) in the compressor Operators /
Instruction Manual.
Shut down the compressor. Close the isolation valve. Relieve the
system air pressure. Ensure that all air pressure has been relieved from
the compressor and air system.
Disconnect power to the compressor before servicing. Lock and tag the
main power disconnect switch in the open (off) position.
WARNING
Failure to adhere to these recommendations can
result in mechanical failure, property damage and
serious injury or death.
en
FOREWORD
The information contained in this manual has been prepared to assist
in the operation, maintenance and the ordering of replacement parts
when required.
Before operation is begun, it is essential that this manual be studied and
understood to obtain a clear knowledge of the total package system
and the functions to be performed.
PURPOSE
The purpose of this supplement is to provide information on
the unique features of the Modulation Control Option. Aspects of
modulation control are covered in this supplement that are not
covered in the Operator's Manual. Both should be used
conjunctively . This manual supplements, rather than replaces the
Operator's Manual.
HASP
KEY LOCK
LEVER
TAG
http://air.irco.com