Amplifier Settings; Signal Input And Output Configurations; Input Gain; Internal Crossover - Orion Cobalt CO600.4 Installationsanleitung

HIGH LEVEL HArNESSES
Do not connect the high level input connections to power, signal, or chassis ground as damage
to the head-unit outputs may result . The high-level inputs are designed to work with either
grounded or BTL speaker level outputs (found on most head units) .

AMPLIFIEr SETTINGS

Signal Input and Output Configurations

The input section of the amplifier consists of a 2 CH / 4 CH switch that sets the output configura-
tion, gain controls, and rCA inputs . The input section makes it easy to adapt this amplifier to
most system configurations .

Input Gain

The Orion Cobalt CO600 .4 amplifiers have level adjustments to allow for easy integration with
any source unit . The input sensitivity can be adjusted from 250mV to 5V . refer to Testing the
System and Adjusting the Sound of the System sections of this guide for detailed instructions
on setting the gain .

Internal Crossover

The crossover section of the Orion Cobalt CO600 .4 amplifiers is continuously variable and
extremely flexible .
When using Orion Cobalt loudspeakers, minor deviations from the recommended frequency
ranges can provide superior results depending on your speaker locations and your vehicle
acoustics . Setting crossover frequencies higher than recommended will not cause damage and
may provide superior sonic results depending on your system's performance goals . refer to your
loudspeaker owner's manual for assistance in choosing the proper crossover frequencies for
your system .
Low-Pass Crossover
The low-pass crossover is active with a 2nd order (2dB per octave) slope . The low-pass crossover
is continuously variable from 50Hz to 500Hz .
© 2007 directed electronics—all rights reserved
Downloaded from www.Manualslib.com
HIGH LEVEL CONNECTIONS
WIrE COLOr
Black
White
White/Black
Green/Black
Green
Gray
Gray/Black
Violet/Black
Violet
manuals search engine
INPUT CONNECTION
Ground
+ Left Front channel
- Left Front channel
- right rear channel
+ right rear channel
+ right Front channel
- right Front channel
- Left rear channel
+ Left rear channel
5