Introduction; What's In The Box; Practice Safe Sound - Orion Cobalt CO600.4 Installationsanleitung

INTrODUCTION

Thank you for your purchase of a Orion Cobalt power amplifier . Each Orion Cobalt amplifier is
designed to be the leader in its class offering the most power, advanced features, and extreme
ease of use . In high-end sound systems or high SPL systems, Orion Cobalt amplifiers will give you
years of trouble-free performance .
●
The installation of all Orion Cobalt components will determine the overall performance result .
Improper installation will not only limit the performance of your Orion Cobalt system but also
potentially compromise the reliability of this amplifier . To ensure proper sonic results and com-
ponent reliability, please refer to your authorized dealer for installation assistance or advice . If
you decide to perform the installation yourself, be sure to read the entire manual before begin-
ning the installation .

WHAT'S IN THE BOX

●
●
●
●

PrACTICE SAFE SOUND™

Continuous exposure to sound pressure levels over 00dB may cause permanent hearing loss .
High power automotive sound systems can generate sound pressure levels in excess of 30dB .
When playing your system at high levels, please use hearing protection and avoid long term
exposure .
Model:
Serial Number:
Date of Purchase: __________________________________________________
2
Downloaded from www.Manualslib.com
CO600.4 - 250 Watt - four-channel Class A/B amplifier with built-in fully variable
low-pass crossover . Equipped with remote gain, the CO600 .4 is capable of two-channel
operation with a maximum power of 600 W when both the front and rear bridged
channels are driven into 4 ohm speaker loads .
() Amplifier
(2) Spare fuse(s)
(4) #8 self-tapping black Phillips head pan head screws
() Amplifier installation and operation manual
__________________________________________________
__________________________________________________
manuals search engine
© 2007 directed electronics—all rights reserved