Victron energy MultiPlus-II 24/3000/70-32 Anleitung Seite 135

APPENDIX A: Connection overview
BIJLAGE A: Overzicht aansluitingen
ANNEXE A : Vue d'ensemble des connections
ANHANG A: Übersicht Anschlüsse
APÉNDICE A: Conexiones generales
APPENDIX A: Anslutningsöversikt
APPENDICE A: Panoramica dei collegamenti
EN:
A Load connection. AC out1. Left to right: N (neutral), PE (earth/ground), L (phase)
B Load connection. AC out2. Left to right: N (neutral), PE (earth/ground), L (phase)
C AC input: Left to right: N (neutral), PE (earth/ground), L (phase)
D Alarm contact: (left to right) NO, NC, COM.
E Trickle charge (12 and 24V model only)
F Primary ground connection M6 (PE).
G M8 battery positive connection.
H M8 battery minus connection.
I sw itch: 1=On, 0=Off, ||=charger only
J Terminal for: top to bottom:
1. 12V 100mA
2. Programmable contact K1 open collector 70V 100mA
3. External ground relay +
4. External ground relay –
5. Aux input 1 +
6. Aux input 1 –
7. Aux input 2 +
8. Aux input 2 –
9. Temperature sense +
10. Temperature sense –
11. Battery voltage sense +
12. Battery voltage sense -
K External current sensor
L 2x RJ45 VE-BUS connector for remote control and/or parallel / three-phase operation
M Connector for remote sw itch: Short to sw itch "on".